How to Set Up Your RELX Vape: A Complete Guide
Share
How to Set Up Your RELX Vape: A Complete Guide
Congratulations on your new RELX vape. Whether you are a beginner or a veteran vaper, you already know that choosing a quality vaping device can significantly improve your experience.
However, to continue to get good taste and satisfactory smoke effects, just a good device is not enough. The setup process is critical and can determine whether your experience is a hit or miss.
If you are unsure of how to set up your new vape and don't want to deal with dead batteries or burnt e-liquid, follow this step-by-step guide.
Step 1 - Charge the Device
Unlike other forms of nicotine inhalation, vaping requires some preparation. Most vapes rely on an internal battery, so before use, you'll need to make sure your device is fully charged.
A new device usually takes 2-4 hours to go from completely dead to fully charged, and some smaller devices may only take 1 hour. Most vape kits come with the necessary charging equipment, including the device itself, a USB charging cable, and (possibly) a wall adapter.
Accessing the battery component can be a little tricky as it is often hidden inside the device. Generally, unscrewing the bottom of the device will reveal the battery. It's important to note that devices with built-in batteries do not require battery replacement.
If you have difficulty locating the battery component or have questions about battery kits, it is recommended to contact the manufacturer. As with any battery-powered device, improper use can lead to device damage or personal injury.
Step 2 - Check the Coil
While vaping may seem simple to use, to operate it correctly, you need to understand some basic terminology. One of the most important terms is "coil."
The coil is the key component that heats the e-liquid inside the device and converts it into vapor. You can easily find the coil when you disassemble your vape, as it is connected to the wicking material of the device (usually cotton, but sometimes rayon, silica, or mesh).
Every time you use a new device, make sure the coil is wrapped correctly around the wick. If the coil is not tightly fitted to the wick and spiraled, you will need to adjust it.
A loose coil can cause e-liquid to leak from the surrounding air holes and prevent vapor production.
Step 3 - Prime the Coil
Not only does the coil need to fit snugly around the wick, but it also needs to be "primed" to produce the ideal vapor taste and density you expect.
To avoid dry hits or an unpleasant burnt taste, you must ensure the wick is fully saturated with e-liquid. The best way to do this is to prime the coil.
Priming the coil refers to adding lubricant to the coil before heating. Simply place a few drops of e-liquid on the coil, allowing the surrounding cotton to fully absorb the e-liquid, before filling the tank.
Only a fully primed coil (and fully saturated wick) can produce rich and flavorful vapor, so this is an important step not to be overlooked.
Step 4 - Let the E-liquid Sit
Even after the coil has been primed, you still need to give the wick some time to fully absorb the e-liquid. Vaping experts recommend letting the device sit for 2-3 minutes after filling the tank or pod to allow the e-liquid to fully penetrate the wick.
If the wick is still dry when heated, it can lead to a burnt wick, which not only affects the taste but can also damage the device.
Step 5 - Start the Device
Once the coil is primed and the e-liquid has sat, you are ready to start using your vape!
Starting the device can be a little tricky. To prevent the vape from accidentally turning on in your bag or pocket, devices usually require a specific activation action.
Press the power button five times quickly to start the device. If you still encounter problems, the device may have a more complex design, please refer to the user manual or manufacturer's instructions.
Other Things to Keep in Mind When Setting Up Your Vape
-
E-liquid Ratio
Different users have different preferences for vapor density, and e-liquid ratios will vary.
- Thinner e-liquids (e.g., 50:50 or lower ratio, coil resistance of 1.0 ohms and above) require lower heating temperatures, and the vapor is smoother and easier to inhale.
- Thicker e-liquids (e.g., 70:30 ratio, suitable for sub-ohm devices with coil resistance below 1.0 ohms) can produce denser vapor.
Note: Using e-liquids that are too thin in sub-ohm devices often leads to leaking or burning issues.
-
Coil Replacement
Even the highest quality coils usually only last 5-7 days. When setting up your vape, you also need to be prepared to replace the coil as soon as the taste declines to avoid burning and damaging the device.
Conclusion
To achieve an ideal vaping experience, simply purchasing a quality device is not enough.
Correct operating procedures and material usage are crucial for device performance. Ignoring the above steps can lead to a poor taste or even damage the device.
Take the time to set up your vape correctly, and your taste buds will thank you for the care.